Page 1 of 1
Little survey, FPS in Simple.ppl and Simple2.ppl
Posted:
May 27, 2004 @ 1:19pmby kornalius
I would like to know how many frames you are getting in the Simple.ppl and Simple2.ppl demos.
Make sure you keep the Simple2.ppl at it's default location (not moving the screen around with the arrows.)
My system:
Asus A620 @ 400 Mhz
Simple.ppl = 130 - 144 FPS
Simple2.ppl = 61 - 64 FPS
Regards,
Kornalius
Posted:
May 27, 2004 @ 2:36pmby Guest
Posted:
May 27, 2004 @ 5:41pmby kornalius
Posted:
May 27, 2004 @ 6:29pmby fast_rx
Toshiba e750
simple 45 fps
simple2 24 fps
Posted:
May 28, 2004 @ 3:45amby jsjohnson
Posted:
May 29, 2004 @ 9:17pmby kornalius
Posted:
May 30, 2004 @ 4:31pmby s.c.s.i.
Posted:
May 31, 2004 @ 2:34pmby blazingwolf
Toshiba e800 @ 400mhz WM2003 Second Edition
simple.ppl -40fps
simple2.ppl -24fps
Posted:
Jun 1, 2004 @ 4:55pmby oguime
iPaq 22XX 400MHz WM2003
Simple = 42 fps
Simple2 = 28 fps
Regards,
Gilson
Posted:
Jun 2, 2004 @ 3:40pmby fast_rx
I just re-tested with 0.4b, and it is faster like you suggested...
simple1: 50 fps
simple2: 31 fps
It was 45/25 before.
One bug though, It seems like simple3 doesn't initialize the screen correctly until the first stylus press. The top portion of the screeen (sometimes just a few lines, sometimes a 1/4 of the screen) stays white, obscuring the text, until I use the stylus.
Wait, 2 bugs, simple2 exits after running for a while. I see nothing in the code that would make it exit after a certain amount of time. I assume it's a bug as well, but I can't see any errors.
Posted:
Jun 3, 2004 @ 2:30amby kornalius