Page 1 of 2

Need help - DEAD Ipaq

PostPosted: Mar 7, 2005 @ 8:38pm
by EvilMartin

PostPosted: Mar 7, 2005 @ 8:41pm
by EvilMartin

PostPosted: Mar 7, 2005 @ 9:12pm
by David Horn

PostPosted: Mar 7, 2005 @ 9:39pm
by Caesar

PostPosted: Mar 7, 2005 @ 11:10pm
by EvilMartin

PostPosted: Mar 7, 2005 @ 11:17pm
by Guest

PostPosted: Mar 8, 2005 @ 12:49am
by David Horn

PostPosted: Mar 8, 2005 @ 9:12am
by EvilMartin

Pls reply here only

PostPosted: Mar 8, 2005 @ 9:23am
by saurabh

PostPosted: Mar 8, 2005 @ 9:28am
by EvilMartin

PostPosted: Mar 8, 2005 @ 9:56am
by EvilMartin
Okay...

Found the ROM on the HP site (SP23661) followed the set up instructions from your link.

Got the Ipaq into SERIAL mode

Connected it to the cradle

Ran the UpgradeUT.exe

It couldnt identify it - "error 116 Ipaq Identification Error" OR after performing a normal reset says "error 101 connection error"

Is there any way of directly addressing the Ipaq once it's in SERIAL mode - perhaps directly installing the "NK_Wisr111_00WWE_NBT.nbf" ROM image?

PostPosted: Mar 8, 2005 @ 12:43pm
by David Horn
Did you get it into the Parrot bootloader mode?

PostPosted: Mar 8, 2005 @ 1:13pm
by EvilMartin
Erm... I got it into the SERIAL/USB mode if thats what you mean. I pressed the on/off, button 2 and reset.

But the exe did not find the Ipaq

I've found a copy of MTTY but dont know what to do with it

PostPosted: Mar 8, 2005 @ 1:25pm
by EvilMartin
Okay - we have some progress, the MTTY rom installer will map the device memory! But when I try to use the LNB command it tells me (in odd english) "this application only deal with absolutely image file". So what to do now, I do not know.

HHHHEEEEELLLLPPPPPP

PostPosted: Mar 8, 2005 @ 2:21pm
by David Horn
You can find a ROM on the internet somewhere that isn't an EXE. However, if you look around your computer, you should find the one extracted from the .exe file and copy it over manually. Don't ask me how you go about doing that, though...