Page 1 of 1

iPaq Button Stuck

PostPosted: Mar 5, 2002 @ 2:53am
by Michael Y
Before I call the Compaq tech support (eww!), I thought I'd just make sure there isn't an easy answer. I was recently playing PocketSCUMM on my iPaq 3835 and my Contacts button got stuck. Is there anything I should do to try to get it unstuck or should I just call Compaq to get it repaired?

PostPosted: Mar 5, 2002 @ 2:59am
by Dan East
The same thing happened to my Power button. The plastic button you see is just a link between the actual button on the circuit board and the outside of the device. Sometimes it is possible for the button to be pressed hard enough, and scooted to the side a bit, so it catches under the edge of the case. I took a small screwdriver and attempted to pop it back over, but it came completely loose down in the case. I opened up my iPaq and fixed it better than new in about 15 minutes. That is not an option for most people though. :)

Dan East

PostPosted: Mar 5, 2002 @ 5:52am
by Robotbeat
Just hit your iPAQ.

PostPosted: Mar 5, 2002 @ 1:32pm
by Luciano U. Werner

PostPosted: Mar 5, 2002 @ 6:24pm
by David Horn