PocketQuake Benchmark Archive

by **James S** » Jan 19, 2003 @ 3:46pm

Are you sure you've got a blank config. Any settings that WERE in the autoexec.cfg file are automatically placed in config.cfg, so your autoexec.cfg file settings are still there. Make sure you delete that file, too, or atleast move it out of that directory.

I just can't see how 72MHz is giving you an extra 2 FPS. An extra 50MHz on my E-125 only gave me 0.5FPS... but an extra 30 MHz DID give the SA 2 FPS extra. I guess I'll put it up, but can you verify it by checking these things? And while you're at it, try 600MHz

by **Mali** » Jan 19, 2003 @ 5:06pm

before i do a new benchmark i delete the old config.cfg and rename autoexec.cfg to autoexec.cf_.

as i said a L=32 value increases the memspeed and therefore the results are higher than if the only difference was the 72mhz.
on brighthand some people made benchmark tables which indicate the same, if you look at the memory results.

in speedstepper 600mhz is currently not available. i think to reach 600mhz you would have to increase vcore on wich antontomov is working.

another guy tried to reach 472mhz with pocket hack master on his zayo with no luck. i suppose this is a bug in the program. untill that is fixed and an adjustment of vcore is available 472mhz is the way to go.

by **Kangol** » Jan 19, 2003 @ 7:23pm

If someone is unsure or want the benchmark to be believable, then a screenshot or Digi photo of the completed benchmark post would clear that up.

Didn't someone say they got 14.7fps with the ASUS 600?

by **Mali** » Jan 19, 2003 @ 8:26pm

14.7 was with my optimized config file. that score went up to 16.5fps after overclocking.

i`m very sorry, but a mistake went in it must be 12.5 in portrait and not 12.9. :oops:

i did the benchmark 3 times again to be sure everything`s right. it would be nice if others here with a asus/zayo would do the test also.

you`ve got to have in mind that everytime you shut off the device or do a softreset the 472mhz are gone. reset the device, start speedstepper at 472mhz and then do the benchmark.

by **Kangol** » Jan 19, 2003 @ 10:58pm

16.5fps is very good!
I would love to get that, wish I could try a 250mhz setting compared to 236mhz...

by **Kangol** » Jan 19, 2003 @ 10:59pm

BTW.........

What is the time it takes the demo to complete at 16.5fps?

by **James S** » Jan 19, 2003 @ 11:24pm

Well there are 985 frames, I believe. Or there abouts. so it would take it about a minute.

by **Mali** » Jan 19, 2003 @ 11:58pm

with wisbar disabled i get 16.9 in 57.5 sec.
you can find my autoexec.cfg in the optimizations-thread.

by **Kangol** » Jan 20, 2003 @ 1:41am

by **Kangol** » Jan 20, 2003 @ 2:19am

by **chrissikurz@web.de** » Jan 20, 2003 @ 10:48pm

by **Mali** » Jan 20, 2003 @ 11:04pm

by **James S** » Jan 21, 2003 @ 12:19am

by **(TSC)Bender** » Jan 21, 2003 @ 2:23am

Alright, heres some updated benchmarks, on my replacement Zayo. Its a clear autoexec file. I did soft resets between each one and three times in a row to see any change:

Razor Zayo
demo1.dem

Turbo Mode (400 mhz): 10.3 fps
Standard Mode (200 mhz): 5.3 fps
Power-Saving Mode (100 mhz): 3.2 fps

Couldn't get my Zayo to 472mhz without freezing during the benchmark, using speedstepper. I might try another app later.

by **sponge** » Jan 21, 2003 @ 3:09am

PocketQuake Benchmark Archive

Sort

Forum Description

Moderators:

Forum permissions